About a month ago I bought some Goodridge Superbike Pro Bolt-On brake lines for the front of my SV650 Superbike. The front end is off a 2006 GSX-R600 so that is the lines I bought.
It turns out the right banjo fitting puts the line in the way of the upper caliper mounting bolt. To remove the caliper mounting bolt you have to bend the line out of the way but even then the covering gets nicked. Eventually the steel wrapping of the line inside gets rubbed.
Defiantly a safety problem. So I've contacted the place I've purchased them from and am trying to figure out if I just got the wrong lines OR if there was some manufacturing problem.
Hope this all works out as I love the single banjo bolt at all of the fittings instead of a double somewhere like the master cylinder.
Here are some pictures I took with my of the issue:
